|Home||» Products||» LED Light||» LED Daytime Running Light|
LED Daytime Running Light
With the assistance of skilled and dedicated professionals, we bring forth for our clients technologically upgraded LED Daytime Running Light. It is an automotive lighting device that automatically switched on when the vehicle is moving forward. Further, it emits light equably with full color to increase the conspicuity of the vehicle during daylight conditions. This system is designed and manufactured in adherence with the international standards using high quality components. The offered LED Daytime Running Light is available in varied specifications as per the requirements of clients.
1).Product name: LED Daytime Running Light
3).Certificate Name: DRW Emark-4
4).Certificate No.: E4-- 87R-- 000011
5).Whole kits Consist: Two LED lamps (Left one and right one), wiring, one paper gift box, user manual
6). Lamp Consist: Electronic circuit board, viewfinder, wiring, lamp hull and housing;
7). Electronic circuit board: 5 high-power LEDs and Controlling gear
3.Major Technology Parameters:
Rated Working voltage: DC 12V
Rated Working current: DC 1.12A
Rated Power consumption:13.44W Limb darkening current: DC 0.66A Limb darkening
Power consumption: 7.92W 4.
Maximum Technology Parameters:
1). Maximum working voltage: DC 24V, 1 minute only;
2).Over working voltage: DC 18V, 1 hour only;
3).Continuously working time max 24hours: maximum current rangeÃÆÃ¢â¬Å¡ÃâÃÂ±2mA
4).Maximum surface temperature:less than 60C (Extraventricular temperature:20C)
5. LED bulb technology parameters:
1).Bulb Color temperature range: 6,000K-6,700K
2).Power: 1W (each LED bulb)
3).Rated working current:less than 300 mA
4).Current stablilty:ÃÆÃ¢â¬Å¡ÃâÃÂ±2 mA (in 24 hours)
5).Brightness is between 70 to 90 LM 6.
1). High-Voltage Protection: The control system will stop working automatically to protect the control module from damage when the power voltage is higher than 15.5V, then LED light only works by the outer power directly;
2). Low-Voltage Protection: The LED light will shut off to protect the system once the voltage is lower than 9v;
3). Lose-Frequency Protection: The LED light shut off once the control frequency is abnormal to protect the control module and LED light.
It is no harmful to circuit when the three cables of LED were connected incorrectly. The LED light is off when connection is wrong, it will be on when connection is right. The three cables of LED light are VBB, Vss and VC respectively.